IOG500-1M112
  •  Dual SIM LTE Cat.M1/NB1
  •  1*10/100 Ethernet
  •  1*WiFi 11n 1T1R
  •  1*RS232/485, 1*DI+1*DO
  •  Metal Housing, Wall Mount
  •  DC 9~36V TB, -30°C ~ 70°C
 IOG500-0T112
  •  Dual SIM LTE Cat.4
  •  1*10/100 Ethernet
  •  1*WiFi 11n 1T1R
  •  1*RS232/485, 1*DI+1*DO
  •  Metal Housing, Wall Mount
  •  DC 9~36V TB, -30°C ~ 70°C

 

 IOG700-1M302
  •  Dual SIM LTE Cat.M1/NB1, 1*RJ45 FE WAN
  •  1(2)*10/100 Ethernet
  •  1*RS485, 4*DI+4*DO, 2*AI+1*AO
  •  8GB Storage
  •  Metal Housing, DIN-Rail / Bracket
  •  DC 9~36V TB, -30°C ~ 70°C
 IOG700-0T102
  •  Dual SIM LTE Cat.4, 1*RJ45 FE WAN
  •  1(2)*10/100 Ethernet
  •  1*RS232/485, 1*DI+1*DO
  •  1*MicroSD Slot
  •  Metal Housing, DIN-Rail / Bracket
  •  DC 9~36V TB, -30°C ~ 70°C

 

 IOG700-0T302
  •  Dual SIM LTE Cat.4, 1*RJ45 FE WAN
  •  1(2)*10/100 Ethernet
  •  1*RS485, 4*DI+4*DO, 2*AI+1*AO
  •  8GB Storage
  •  Metal Housing, DIN-Rail / Bracket
  •  DC 9~36V TB, -30°C ~ 70°C

 

 IOG700-0T501
• Dual SIM LTE Cat.4, with GNSS
• 1*RJ45 GE WAN, 1(2)*Gigabit Ethernet
• 2*RS232/485, 1*DI+1*DO
• 1*MicroSD Slot, 1*USB
• Metal Housing, DIN-Rail / Bracket
• DC 9~36V TB, -30°C ~ 70°C
 IOG700-0TL23
  •  1*LoRa(8*Channels), built-in Network Server
  •  1*LTE module (2*micro-SIM)
  •  2*RJ45 FE
  •  1*802.11n 2T2R
  •  Metal Housing.  DIN-Rail / Bracket
  •  DC 9~36V, -30°C ~ 70°C

 

IOG700-1M302
  •  Dual SIM LTE Cat.M1/NB1, 1*RJ45 FE WAN
  •  1(2)*10/100 Ethernet
  •  1*RS485, 4*DI+4*DO, 2*AI+1*AO
  •  8GB Storage
  •  Metal Housing, DIN-Rail / Bracket
  •  DC 9~36V TB, -30°C ~ 70°C

 

  • IIoT Telemetry with Multi-I/O

    IOG700-0x302 is cellular based remote terminal unit (RTU) for IIoT telemetry of SCADA system. With Cellular WAN, it is non-geographic limit and can install at instant. With two Ethernet, it can connect to two network devices. It can also configure one port as fail over Ether-WAN for reliable dual-WAN scenario. With one serial and multiple D/A I/O interfaces, it can connect to more legacy serial devices, digital/analog sensors and relay output to control device. Embedded storage based data logging function can store serial and D/A input data for non-broken or scheduling transfer. Smart event handling allow remote management and can initiate event to trigger action.

  • Reliable & Secure Transfer

    Besides Cellular WAN, there is also configurable Ether-WAN for fail-over function. It can guarantee reliable transfer. Capable of various VPN technologies, it can build tunnel with famous VPN server for scenario requirement. Built in both IPv4/IPv6 and routing protocol are compatible with most ISP network. Cellular toolkit simplifies setting, utilizes ISP service and monitoring data usage. Easy setting. Friendly setting with Web UI for basic, CLI and Script window for advance requirement. Built-in TR-069 can work with AMIT-NMS and SNMP work with popular network tools for multi-site management.

  • Intelligent Protocol Conversion

    Built-in both Ethernet and serial interface, it can connect not only IP based equipment but also acquired legacy serial devices. It is Modbus gateway connect SCADA server and remote machine to perform intelligent protocol conversion between Modbus/TCP and Modbus/RTU/ASCII. It can also be slave when SCADA server do configuration or Modbus master to access device when perform data logging function.

  • Multi-I/O Data Logging

    There are a serial port and multiple D/A Input interfaces for IIoT telemetry requirement. It is important to record all D/A input at period of time no matter connection online or broken is helpful for Administrator’s further data analysis and statistics. Multi-mode data logging function can record data for various scenarios. All files stored can download by FTP or setting at Web UI. With this function can achieve non-broken and scheduling transfer.

  • Smart Event Handling

    According to pre-defined rule lists, Administrator can change RTU setting or trigger event action remotely by SMS, SNMP trap. When there is new input or behavior change of RTU, it will be new event to trigger action, and also can notify administrator or related devices by SMS or SNMP traps. It will be useful function to work as automatic process when setting one event to trigger consecutive events for special purpose within RTU or more remote devices.