AMIT Enabling Wireless M2M-IoT


  •  4G (1*SIM)
  •  1*RJ45 FE
  •  Metal Housing
  •  DC 9~36V TB
  •  -30°C ~ 70°C


• 4G (2*SIM)
• with GNSS
• 1*RJ45 GE WAN, 1(2)*Gigabit Ethernet
• 2*RS232/485, 1*DI+1*DO
• 1*MicroSD Slot, 1*USB
• Metal Housing, DIN-Rail / Bracket
• DC 9~36V TB, -30°C ~ 70°C


  • High Speed IIoT Telemetry

    IOG700-0x501 is high speed cellular based remote terminal unit (RTU) for IIoT telemetry of SCADA system. With both Giga Ethernet and 4G Cat.4 or Cat.6, it can afford high speed device or sub network. it is non-geographic limit and can install at instant. With two Ethernet, it can connect to two network devices. It can also configure one port as fail over Ether-WAN for reliable dual-WAN scenario. With serial and I/O interfaces, it can connect to more legacy serial devices, sensors and relay output to control device. Micro-SD storage based data logging function can store serial and D/I data for non-broken or scheduling transfer. Smart event handling allow remote management and can initiate event to trigger action for automatic control purpose.

  • Reliable & Secure Transfer

    Besides Cellular WAN, there is also configurable Ether-WAN for fail-over function. It can guarantee reliable transfer. Capable of various VPN technologies, it can build tunnel with famous  VPN server for scenario requirement. Built in both IPv4/IPv6 and routing  protocol are compatible with most ISP network. Cellular toolkit simplifies setting, utilizes ISP service and monitoring data usage. Easy setting. Friendly setting with Web UI for basic, CLI and Script window for advance requirement. Built-inTR-069 can work with AMIT-NMS  and SNMP work with popular network tools for multi-site management.

  • Intelligent Protocol Conversion

    Built-in both Ethernet and serial interface, it can connect not only IP based equipment but also acquired legacy serial devices. It is Modbus gateway connect SCADA server and remote machine to perform intelligent protocol conversion between Modbus/TCP and Modbus/RTU/ASCII. It can also be slave when SCADA server do configuration or Modbus master to access device when perform data logging function.

  • Non-Broken Data Logging

    There are serial or D/I interface for IIoT telemetry requirement. To keep record all data when transaction no matter connection online or broken is helpful for Administrator’s further data analysis and statistics. Multi-mode data logging function can work for scenario requirement. It can work for non-broken and scheduling transfer.

  • Smart Event Handling

    According to pre-defined rule lists, Administrator can change RTU setting or trigger event action remotely by SMS, SNMP trap. When there is new input or behavior change of RTU, it will be new event to trigger action, and also can notify administrator or related devices by SMS or SNMP traps. It will be useful function to work as automatic process when setting one event to trigger consecutive events for special purpose within RTU or more remote devices.