AMIT Enabling Wireless M2M-IoT

Device Interface

• LTE Module: 1*Cat-12 LTE(600Mbps DL, 150Mbps UL), 2*SIM
• Ethernet: 1(2)*RJ45 Gigabit Ethernet
• Field Bus: 2*RS232/485 (Terminal Block)
• Log Storage: 1*USB, 1*Micro SD
• I/O: 1*DI (“Logic 0”: 0~2V, “Logic 1”: 5V~30V),
  　　1*DO (Relay Mode, up to 30V/1A)
• Power Input :  1* DC 9V ~ 36V (Terminal Block)
• Antenna Con.: 2*SMA (F)-LTE, 1* SMA(F)-GNSS

WAN & Uplink

• WAN: CBRS LTE, Ether-WAN;  Failover
• Cellular: 3CBRS LTE, IP Pass-through, IPv4/6
• Ether-WAN: Dynamic IP, Static IP, PPPoE , PPTP, L2TP
• Network Monitor: ICMP/DNS Query

Protocol

• LAN & VLAN: DHCP Server/Relay , Port/Tag based VLAN
• IPv6: Dual Stack, Static IPv6, DHCPv6, PPPoEv6
• Port Forward: NAT  1-1, 1-many, tansversal, DMZ, Virtual Server & Computer, VPN Pass-through
• Routing: Static, Dynamic - RIP1/RIP2, OSPF, BGP

Field Comm.

• Virtual COM: TCP Client, TCP Server, UDP
• Modbus: Gateway for Modbus TCP/RTU/ASCII Master/Slave Access; Slave for Device Status/Information Access
• Data Logging: Sniffer, Off-line / Full-time Proxy, mixed modes

Object

• Scheduling: Time Schedule List
• Grouping: Host Grouping List
• Ext. Server: Email, Syslog, RADIUS, SCEP, FTP, DDNS, IGMP
• Certificate: My Certificate, Trusted Certificate, Issue Certificate

Service

• Cellular Toolkit: Data Usage, SMS, SIM PIN, USSD, Network Scan
• Event Handling: User Defined Manage/Notify Event; Action & Trigger by SMS, Mail, Syslog, SNMP Trap, Modbus, I/O
• GNSS: GPS Location Tracking / Viewer

Security

• VPN Tunneling: IPSec, OpenVPN, PPTP, L2TP, GRE
• Scenario: Site/Host to Site/host; Dynamic VPN
• Firewall: SPI Firewall with Stealth Mode, IPS
• Access Control: Packet Filter, URL Blocking, MAC Filter

Administration

• Configuration & Mgmt.: Web, Telnet & SSH, Command Script, SNMPv3 Std. & Proprietary MIB, TR069
• System: Upgrade, Backup & Restore, Reboot & Reset, SysLog
• Diagnostic: Packet Analyzer, Diagnostic Tools

Environment

• Operation Temperature: -22°F-158°F (-30°C-70°C)
• Storage Temperature: -40°F-185°F (-40°C-85°C)
• Humidity:        10%~95% (non-condensing)
• Enclosure:       Metal, Din-Rail, Mounting Bracket (sold separately)
• Dimension: 31x 99 x131mm (w/o DIN-Rail kit) 
  　　　　　　31x108x131mm (with DIN-Rail kit)

Certificate 

• FCC
• FCC Part 96 for CBRS

Package Accessory

• 1*IOG700-CC501
• 1*Power Adapter DC 12V/2A
• 2*CBRS LTE Antenna 
• 1*Terminal Block (2-pin for DC Power)
• 1*Terminal Block (4-pin for DI/DO)
• 1*Terminal Block (6-pin for 2*RS232/485)
• 1*DIN Rail Kit, 1*Screw Bag
• 4*Rubber feet

• High-Speed IIoT Telemetry

  IOG700 is a high-speed 4G-based remote terminal unit (RTU) for IIoT telemetry of SCADA system. With two Gigabit Ethernet and LTE uplink, it can afford high speed device or sub network. it is non-geographic limit and can install at instant. With two Ethernet, it can connect to two network devices. It can also configure one port as fail over Ether-WAN for reliable dual-WAN scenario. With serial and I/O interfaces, it can connect to legacy serial devices, sensors and relay output to control device. Micro-SD storage based data logging function can store serial and D/I data. Smart event handling allow remote management and can initiate event to trigger action for automatic control purpose.

• Reliable & Secure Transfer

  Besides Cellular WAN, there is also configurable Ether-WAN for fail-over function. It can guarantee reliable transfer. Capable of various VPN technologies, it can build tunnel with famous  VPN server for scenario requirement. Built in both IPv4/IPv6 and routing  protocol are compatible with most ISP network. Cellular toolkit simplifies setting, utilizes ISP service and monitoring data usage. Easy setting. Friendly setting with Web UI for basic, CLI and Script window for advanced requirement. Built-inTR-069 can work with AMIT-NMS  and SNMP for remote device management.

• Intelligent Protocol Conversion

  Built-in both Ethernet and serial interface, it can connect not only IP-based equipment but also legacy serial devices. It is the Modbus gateway connect SCADA server and remote machine to perform intelligent protocol conversion between Modbus/TCP and Modbus/RTU/ASCII. It can also be set as slave mode when SCADA server do configuration or Modbus master to access device when perform data logging function.

• Non-Broken Data Logging

  There are serial or D/I interface for IIoT telemetry requirement. To keep record all data when transaction no matter connection online or broken is helpful for Administrator’s further data analysis and statistics. Multi-mode data logging function can work for scenario requirement. It can work for non-broken and scheduling transfer.